Economic A4 Photocopy Crosscutting Machines
Product Description
Specifications | |
Category | Economic A4 Photocopy Crosscutting Machines |
Application Material | Regular Papers,Kraft Paper, Paperboard, Non-woven Cloth, Film,, Aluminum Foil, Plastic Sheet etc. |
Applicable Width of Axial / Material | 600mm ~ 1600mm /24”-63” or as your request) |
Max. Sheeting Length | 2000mm(79”) |
Max. Machine Speed | 120m/min |
Max. Unwinding Diameter | 1500mm /59”(or as your request) |
Tolerance of Slitting Width | ±0.15mm |
Rated Frequency | 50Hz & 60Hz |
Rated Voltage | 380V,415V,440V,460V,480V,Dual-Voltage (or as your request) |
Unwinding/Rewinding Shaft | 3” Pneumatic Air Expanding Shaft(or as your request) |
Overall Dimensions | 4500*1900*120mm |
Weight | 1800-3000kg |
Environmental Restriction | |
Location | Indoor. The product should be installed on flat and solid foundation. |
Voltage Regulation | ±10% |
Frequency Regulation | ±5% |
Ambient Temperature Range | -5°C~40°C |
Altitude | Not exceed 1000 Meters |
Relative Humidity | Less than 85% RH (Non-Condensation) |
Components | |
Unwinding Section | -3” air expanding rewinding shaft -Pneumatic automatic lift-up loading system -Electromagnetic Brake from Taiwan -Fully automatic tension controller |
Feeding Section | - Feeding motor is controlled by Yaskawa servo motor. - The roller pressure is controlled by the air system,which is adjustable. - Feeding pressure is adjustable by the air circuit. -Rubber roller hardness is 85 degree and diameter is 100mm. |
Sheeting Section | -The upper cutter is stable and lower cutter base is movable. -The cutting moving is controlled by a inverter motor. |
Controlling Section | -PLC & HMI -All the parameters are displayed on the monitor |
Trimmed Waste Edge | -Edge Waste Blower with Expulsion Tube |
Product Categories : A4/A3 paper sheeter
Premium Related Products